The Fly in July sessions are the latest Clan of Ursula recordings, check 'em out!

I've created a CodePlex project for managing alerts in SharePoint 2007 called SPAlertManager.It's a limited scope layouts application for managing alerts for all of a user's sites in a single place, along with the ability to sign up for an alert for a site (it creates an alert for all lists in the site). Just a proof of concept sample, but might be useful to someone someday.

Maybe it's the weeks news, or the summer heat, or something, but it was time to create some noize rock:
54TTL (06:14)

There are two new tracks on the Clan of Ursula page. The entire session was recorded in our rehersal space using a laptop and a couple USB audio interfaces, a lot to remix ... so far only these two tracks. The session recording is known as Mayday and the tracks are Track 1 (9:25) and Track 2 (19:27).
There wasn't a script, or songs, or any conception of what we'd play until we played it - maybe that shows - maybe not ... you be the judge, but that's the guiding principle of the project.
enjoy.

Mali Soundscape No. 1 is a simple soundscape created using the Epiphone LP fretless, and a combination of loops and midi parts in Garageband.

I completed my first fretless conversion project last night. I bought a brand new Epiphone LP Special II at a local music store for around $150, took it home, tore it apart and removed the neck on Saturday, and last night I pulled out the frets. The process was pretty easy to accomplish. It entailed:

 

Securing the neck to a solid surface with spring clamps and a protecting the fretboard and back of the neck with a soft, padded cloth.

Grabbing the frets with a nice strong nipper tool (in this case it was a diagonal cutter) and pulling up. Sometimes this takes a couple tries.

Bang! out comes the fret - they were not glued in.

Very light hand sanding of the fretboard to smooth out any splintering.

Application of wood puttiy into the fret slots using fingers and a rubber glove

Cleaning of excess putty with a slightly damp sponge

Let the putty dry for about an hour

Sand lightly by hand (with a block) using 220 and 400 grit paper

Reassemble

Restring

Play

Set-up the guitar

Smile

Overall, I'm pretty happy with the results. I picked the LP copy after playing a bunch of low-end models and liking the sustain, nech shape, fretboard, and action on the LP better than the Ibanez and other affordable options. Had the frets been glued in, this process would have taken longer - but in this case the fret pulling to the playing took less than 2 hrs.

The strings I ordered from http://stringsandbeyond.com/ on a Friday were delivered on Tuesday - great turn around for such a niche item - I'm impressed. I'll be using them again for sure. Considering that Musician's Friend sells Glissentars, but not the strings - this is a great resource.
I also got a response from Godin regarding several questions I had (about if strings should have come with the instrument, and about a creeking sound when tuning on several tuners). They referred me to Strings and Beyond for strings (I'd already ordered them by that time though), and didn't indicate if the strings should have come with it - I'll take that as a 'no'. They also suggested some graphite dust in the nut slots to cure the creeking - and also since that noise could have caused the the string breakage since tension between the nut and the tuner could cause this problem, it's exactly the spot where the break occurred - anyway, I used a pencil to coat the string slot in the nut, and this cleared up the creeking. I've heard that Godin isn't so responsive to e-mail (by others posting their experience), however they responded the next business day - so, great job on their part.
Now to find a decent playing, cheap electric guitar to make a six steel string fretless from.

I read a bunch of people's experiences regarding the Glissentar before purchasing one. Most noted that the instrument came with a couple extra sets of strings, since they are hardly a stock item anywhere. The strings are nylon, and wound on all but the 1st and 2nd strings. The one I bought didn't come with any extra strings, and I lamented that I'd need to get some quickly since every new stringed instrument I've ever owned broke strings in the first week of use or so.
Well, I boke one on day 3 - no strings were ordered at the time, and the hunt began to find some and order them. They're not exactly an inexpensive thing either, at $16+shipping a set. So I ordered a few sets, and I'm awaiting thier arrival. In the meantime, I reading that shangins to other types of nylon strings (Flatwounds, Tapewounds, some folks break other sets up and use them for the different courses of strings on the instrument), I'll have to investigate the possibility of getting other types of strings to work on the Glissentar, and how much of a hassle it is vs. the possible improvements in tone or feel of the instrument. Some folks indicated a small bead can be used to replace the ball-end when using standard classical type strings.
Another task is finding a hardshell case for the Glissentar.
The Glissentar has got me hooked on the idea of a fretless electric guitar, so I'm looking around and considering buying an inexpensive (but nice) axe to take the frets out of and see how it works.
 For now it's 10 strings only.

Day one with the Godin A11 Glissentar - Yeowww! This thing is really a blast to play. I had read a bit about this instrument before aquiring it, and internet consensus was that it would take a little time to get used to - and that's probably true, since this guitar is fretless, has 11 nylon strings (5 unison pairs, and a low E), and is based on the instrument the Oud - but with a different scale (longer), a wider neck, and tuned like a standard guitar.

• Clip recored in GarageBand with the Glissentar several hours after unpacking it: SteeringTheWater.mp3

Well, it didn't take long for me to get the hang of this fine instrument and retune it to a couple different tunings, and then - off to la-la land in a euphoric daze of jamming.At one point this evening I was contemplating how hard it would be to pull the frets out of all my guitars but then I came to my senses.
The act of playing a fretless guitar is new to me. I've played fretless basses now and again, and play slide often, and my Steinberger's frets are so low it's nearly fretless at this point (but I don't think that counts) - but the intonation of the fretless guitar really didn't cause too much pain in the end, and I really love being able to slide between notes and pitch bend vertically/parallel with the strings, as opposed to perpendicular to them. An interesting consequence of fretlessness (maybe just a newbie thing) is that the normal string bending is hard to do, so you end up using the neck sliding instead. This might actually be the nylon strings, or the doubled strings - but neither of these things are too alien to me, and I just couldn't bend the same old way - the funny thing is that I didn't really care.
The Glissentar is kind of hard to find in a retail store - I was never able to find one in stock. In fact after 2 ebay auctions that didn't pan out, and no others for sale there, and absolutely no online store having stock, I ended up ordering from Musician's Friend - fortunately the 2 week estimated arrival date for the backorder only ended up being a couple days (maybe they just order them when a customer wants one) - but that's cool because it did get here really quick.
One bummer was that every article I read indicated that 2 sets of strings come with the instrument - I got nada - It'll suck if I break a string since these are custom strings (Ball End Nylons ? ... I gotta order a few sets to have around just in case).
I really dig crazy odd instruments, this one ends up not so odd in the end, but does have a unique sound to it. The Godin build quality is pretty nice too - It would be nice to have an Acoustic Electric / Roland Ready version of this instrument since the Godin body style is not so hot, acoustically, when unplugged. Plugged it sounds great.

Day one with the Godin A11 Glissentar - Yeowww! This thing is really a blast to play. I had read a bit about this instrument before aquiring it, and internet consensus was that it would take a little time to get used to - and that's probably true, since this guitar is fretless, has 11 nylon strings (5 unison pairs, and a low E), and is based on the instrument the Oud - but with a different scale (longer), a wider neck, and tuned like a standard guitar.

• Clip recored in GarageBand with the Glissentar several hours after unpacking it: SteeringTheWater.mp3

Well, it didn't take long for me to get the hang of this fine instrument and retune it to a couple different tunings, and then - off to la-la land in a euphoric daze of jamming.At one point this evening I was contemplating how hard it would be to pull the frets out of all my guitars but then I came to my senses.
The act of playing a fretless guitar is new to me. I've played fretless basses now and again, and play slide often, and my Steinberger's frets are so low it's nearly fretless at this point (but I don't think that counts) - but the intonation of the fretless guitar really didn't cause too much pain in the end, and I really love being able to slide between notes and pitch bend vertically/parallel with the strings, as opposed to perpendicular to them. An interesting consequence of fretlessness (maybe just a newbie thing) is that the normal string bending is hard to do, so you end up using the neck sliding instead. This might actually be the nylon strings, or the doubled strings - but neither of these things are too alien to me, and I just couldn't bend the same old way - the funny thing is that I didn't really care.
The Glissentar is kind of hard to find in a retail store - I was never able to find one in stock. In fact after 2 ebay auctions that didn't pan out, and no others for sale there, and absolutely no online store having stock, I ended up ordering from Musician's Friend - fortunately the 2 week estimated arrival date for the backorder only ended up being a couple days (maybe they just order them when a customer wants one) - but that's cool because it did get here really quick.
One bummer was that every article I read indicated that 2 sets of strings come with the instrument - I got nada - It'll suck if I break a string since these are custom strings (Ball End Nylons ? ... I gotta order a few sets to have around just in case).
I really dig crazy odd instruments, this one ends up not so odd in the end, but does have a unique sound to it. The Godin build quality is pretty nice too - It would be nice to have an Acoustic Electric / Roland Ready version of this instrument since the Godin body style is not so hot, acoustically, when unplugged. Plugged it sounds great.